Revive-W

Description

For White Linens

Designed to restore and revive linens to their “as new” appearance. This concentrated powder can reclaim up to 100 pounds of linen. Removes most stains, odors and detergent build-up. Very effective in removing dingy, gray buildup caused by hard water. Contains water conditioners, chlorine destainers and alkaline builders. Safe for all linens not harmed by standard chlorine  leaching. Don’t throw out – Revive!

Directions

Disconnect or disable supply dispensers from activating during reclaim function. If not able to disconnect or disable, consider programming a reclaim cycle in which the standard chemical supplies are not added. Do not mix this product with any other products in the wash cycle. Load machine with items to be revived. Fill machine with warm or hot water (90ºF-150ºF). When water level has been achieved, add Revive-W to wash wheel via manual supply pocket. Depending on wash machine, you may need to flush the manual supply pocket with warm water to dissolve/dilute powder and flush into wash wheel. If possible, set laundry machine to wash with chemical solution for at least 15-20 minutes. Allow machine to drain and rinse linens at least 2 additional times. After cycle is finished, enable or reconnect supply dispenser and process load through a standard wash cycle. This extra step allows for the linens to be thoroughly rinsed (removing residual stain treatment) and to obtain proper finishing (sour and softening) if applicable. Recommended usage is 1 jar (2 pounds) per 100 pounds of linen. If your machine is smaller, proportionally adjust amount used.

Technical Data

Form ………………………………………… Powder
Color ……………………………………….. White
Scent ………………………………………. Chlorine
Solubility …………………………………… Rapid
pH (1% solution) ………………………… 12.0+

Product Category: Laundry Systems/Powders & Solids
DOT Shipping Name: CORROSIVE SOLID, BASIC, INORGANIC, N.O.S., (CONTAINS SODIUM HYDROXIDE), 8,
UN 3262, II.